PropGlide Propeller Coating in UAE
Protect boat and yacht propellers, shafts, rudders, trim tabs and underwater running gear against barnacles, algae and marine-growth attachment with PropGlide foul-release coating.
Protect Your Propeller from Marine Growth
Marine growth on boat propellers and underwater running gear can increase drag, affect propeller efficiency and create additional maintenance requirements. PropGlide creates a smooth foul-release surface that makes it difficult for barnacles and algae to remain firmly attached.
Marine Growth Protection
Helps reduce the firm attachment of barnacles, algae and other marine organisms to propellers and running gear.
Reduced Underwater Drag
A cleaner, smoother propeller surface can help reduce resistance caused by accumulated marine fouling.
Easier Maintenance
Marine growth has less opportunity to form a strong bond with the smooth clear topcoat.
Biocide-Free System
PropGlide is a foul-release coating and does not depend on conventional antifouling biocides.
Foul-Release Coating for Propellers and Running Gear
PropGlide is a specialised marine coating system designed for boat propellers and underwater running gear. Unlike conventional hull antifouling paint, it forms a smooth, low-surface-tension finish that reduces the ability of marine growth to attach firmly.
The complete system combines an etching primer with a clear silicone-polymer topcoat. Correct bare-metal preparation and application timing are essential for reliable coating performance.
Primer Base
Forms part of the etching-primer system used on the prepared underwater metal.
Primer Hardener
Mixed with the primer base according to the manufacturer's specified ratio.
Clear Topcoat
Creates the smooth foul-release finish that helps minimise marine-growth attachment.
Where Can PropGlide Be Applied?
PropGlide is designed for correctly prepared boat, yacht and vessel underwater metal components.
Boat Propellers
Propeller blades and hubs on leisure boats, yachts and commercial vessels.
Propeller Shafts
Correctly prepared underwater shaft surfaces and related running gear.
Rudders
Underwater rudder surfaces exposed to marine-growth accumulation.
Trim Tabs
Boat and yacht trim tabs subject to continuous seawater exposure.
Struts
Propeller-support struts and underwater brackets where technically suitable.
Thrusters
Bow thrusters, stern thrusters and selected underwater propulsion components.
Pod Drives
Compatible underwater pod-drive surfaces following manufacturer preparation requirements.
Sail Drives
Sail-drive systems and related underwater running-gear components.
Why Use PropGlide on Your Boat or Yacht?
Warm seawater can encourage marine growth on vessels kept in UAE marinas. Protecting the propeller and running gear can support cleaner underwater surfaces and reduce unnecessary fouling-related maintenance.
Helps Keep Propellers Cleaner
The slick clear coating reduces the ability of marine organisms to establish firm attachment.
Supports Propeller Performance
Cleaner propellers and running gear help prevent avoidable drag associated with heavy marine fouling.
Suitable for Different Vessel Types
Available for sailboats, leisure boats, motor yachts, workboats and larger marine applications.
Multiple Kit Sizes
Choose a kit based on propeller size, blade count and total underwater running-gear area.
PropGlide Kit Sizes
Kit selection depends on propeller diameter, number of blades, quantity of propellers and the total area of shafts, rudders, struts, trim tabs and other running gear.
175 mlXS Sailboat Kit
Compact kit for small sailboat propellers and limited underwater-running-gear areas.
- 60 ml primer base
- 15 ml primer hardener
- 100 ml clear topcoat
- Suitable for small sailboat applications
250 mlSmall Kit
Suitable for small boat propellers and related underwater running gear.
- 120 ml primer base
- 30 ml primer hardener
- 100 ml clear topcoat
- For 18-24 inch propellers with 3-4 blades
625 mlMedium Kit
Suitable for medium-sized boat and yacht propeller-coating applications.
- 300 ml primer base
- 75 ml primer hardener
- 250 ml clear topcoat
- One 24-36 inch propeller with 4-5 blades
1250 mlLarge Kit
Larger coating kit for yacht propellers and multiple underwater-running-gear components.
- 2 x 300 ml primer base
- 2 x 75 ml primer hardener
- 2 x 250 ml clear topcoat
- For 36-48 inch propellers with 5-6 blades
5120 mlExtra Large Professional Kit
Professional-size PropGlide coating system for larger vessels, multiple propellers and extensive running-gear areas.
- 2729 ml primer base
- 681 ml primer hardener
- 2 x 855 ml clear topcoat
- Estimated coverage up to 180 ft2 / 16.7 m2
Send the propeller diameter, blade quantity, number of propellers, shaft dimensions and photographs. Our team will recommend a suitable kit size.
Antifouling Paint vs PropGlide Foul-Release Coating
PropGlide is intended for propellers and running gear and operates differently from conventional boat-hull antifouling paint.
Traditional Antifouling Paint
- Commonly used on boat and yacht hulls
- May use active antifouling ingredients
- Designed primarily for larger hull surfaces
- Not the same as a foul-release coating
- Product suitability depends on substrate and application
PropGlide Foul-Release Coating
- Designed for propellers and underwater running gear
- Biocide-free coating system
- Creates a smooth, low-friction finish
- Helps reduce marine-growth attachment
- Available in multiple kit sizes
Professional Propeller-Coating Process
Proper surface preparation, coating intervals and curing conditions are critical to achieving reliable adhesion and performance.
Inspect the Running Gear
Check propellers, shafts, rudders, trim tabs and other underwater metal components.
Remove Old Coatings
Completely remove marine growth, contamination and incompatible previous coatings.
Prepare Bare Metal
Sand or mechanically prepare the surface to produce the required profile.
Clean the Surface
Remove dust, grease, oil, sanding residue and other contamination before coating.
Apply Etching Primer
Mix the primer base and hardener correctly and apply thin, even primer coats.
Apply Clear Topcoat
Apply the silicone topcoat within the specified primer-coating interval.
Allow Proper Curing
Protect the coated surface and allow the required drying and curing time.
Final Inspection
Inspect the finished surface before vessel launching or return to service.
Always follow the current PropGlide Technical Data Sheet, Safety Data Sheet and official application instructions. Application conditions can vary according to temperature, humidity and substrate condition.
PropGlide Supply and Application Support in Dubai
Majestic supports yacht owners, boat operators, marine contractors and shipyards with PropGlide product supply and propeller-coating application assistance.
Send Us Your Vessel Details
To recommend the correct kit, please provide:
- Vessel type and current location
- Number of propellers
- Propeller diameter
- Number of blades
- Shaft and rudder dimensions
- Thruster and trim-tab details
- Clear photographs
- Required supply or application service
PropGlide Propeller Coating FAQs
Is PropGlide an antifouling paint?
PropGlide is a biocide-free foul-release coating rather than conventional antifouling paint. It creates a smooth surface that reduces the ability of marine growth to remain firmly attached.
Can PropGlide be applied to boat and yacht propellers?
Yes. PropGlide is specifically designed for propellers and underwater running gear, subject to correct substrate preparation and application.
Can PropGlide be used on propeller shafts and rudders?
PropGlide can be used on correctly prepared shafts, rudders, struts, trim tabs, pod drives, thrusters, sail drives and related underwater components.
Which PropGlide kit size do I need?
The correct kit depends on the propeller diameter, blade count, number of propellers and the total area of all running-gear components that will be coated.
Does the existing coating need to be removed?
Existing incompatible coatings, marine growth, oil, grease and contamination must be removed. The substrate must be correctly prepared according to the current application guide.
Do you supply PropGlide in Dubai?
Majestic provides PropGlide product and technical-support enquiries for boats, yachts and marine applications in Dubai and across the UAE.
Do you provide PropGlide application services?
Application support can be arranged according to vessel location, haul-out schedule, running-gear condition and project scope.
Keep Your Propeller and Running Gear Protected
Contact Majestic for PropGlide kit supply, product selection and propeller-coating application support in the UAE.
