SORB®XT AM Absorbent Mat Roll 30m × 800mm – Oil & Chemical Spill Mat

Description

Industrial Absorbent Mat for Oil and Chemical Spills

SORB®XT AM Absorbent Mat Roll is designed for protecting factory floors, workshops, warehouses and other industrial areas against accidental liquid spills and equipment leaks.

The absorbent roll can collect oils, fuels, lubricants, coatings, water, chemicals and other industrial liquids. It can be cut to the required length, making it suitable for use beneath machinery, production equipment, trucks, railway areas and maintenance workstations.

Key Features and Benefits

• Absorbs oils, fuels, lubricants, coatings, water and chemicals
• Total absorption capacity of approximately 94 litres
• Absorption performance of approximately 4 litres per square metre
• Large 30-metre industrial absorbent roll
• 800 mm width provides broad floor coverage
• Can be cut according to the required application size
• PE-film underside helps prevent liquid penetration into floors
• Slip-resistant surface for industrial working areas
• Suitable for indoor and outdoor solid surfaces
• Can be positioned preventively for extended periods
• Suitable for thermal recycling where permitted

Recommended Applications

• Factory-floor protection
• Workshop oil and chemical spill control
• Industrial machinery leak protection
• Truck and heavy-equipment maintenance areas
• Production and assembly lines
• Warehouses and storage facilities
• Railway and transport-maintenance areas
• Hydraulic-oil and lubricant leaks
• Fuel and coating spill absorption
• Preventive placement beneath leak-prone equipment

Suitable Liquids

• Oil and lubricants
• Diesel and other fuels
• Hydraulic fluids
• Paints and coatings
• Water-based liquids
• Selected industrial chemicals
• Other volatile industrial substances

How to Use the Absorbent Mat

1. Identify the area where leaks or spills are likely to occur.
2. Cut the mat to the required length using suitable cutting equipment.
3. Position the PE-film side against the floor.
4. Place the absorbent surface beneath machinery, vehicles or equipment.
5. Inspect the mat regularly and replace it when saturated or contaminated.
6. Collect the used material using suitable personal protective equipment.
7. Dispose of the contaminated mat according to the absorbed substance and local waste regulations.

Safety notice: Wear personal protective equipment suitable for the spilled liquid. Confirm chemical compatibility and follow the applicable Safety Data Sheet and site spill-response procedure.

Technical Specifications

Industrial Absorbent Mat Supplier in UAE

Request a quotation for the SORB®XT AM Absorbent Mat Roll 30m × 800mm in Dubai and across the UAE. Suitable for factories, workshops, warehouses, shipyards, ports, transport facilities and industrial maintenance operations.